CustomTankBags by LindaT.

Pricing


I take Paypal, Visa, MasterCard, American Express, Discover, personal checks or money orders
Tankbag sized to your bike and specifications
Suitable on most sport touring/standard bikes such as BMW, Ducati, Honda, Kawasaki, Suzuki, Yamaha, Moto Guzzi, Triumph and Harley-Davidsons without a center console
Standard Features:Water Resistant Exterior Zippers
1 Large or 2 small Lid mounted interior flat pockets with pen
/flashlight loops and a D-ring for attaching keys
3 exterior 3DBasic Pocketss (one on either side and one closest to the rider)
Handle made from nylon webbing

No scratch neoprene padding on the surface that contacts the bike
Standard Rain cover
Map pocket made with a water resistant zipper
Mounts with strap around the steering head and straps going under the seat

Choice of high or low contrast logos (low contrast is the default)
Possible Options Additional Charge
Full Circumference Expando Section $40
Half Circumference Expando Section $20
Gizmo Section for electronics with pass thru to main compartment $50
Upgrade Basic Pocket to Standard Pockets $10 per pocket
Upgrade Basic Pocket to Standard Plus Pockets $15 per pocket
Add Hidden Pocket to Standard or Standard Plus Pockets $10 per pocket
Additional 'Basic' Pockets $15 per pocket
Additional 'Standard' Pockets $25 per pocket
Additional 'Standard Plus' Pockets $30 per pocket
Magnetic Mount $50
Bra Mount $45
Panniers (Requires Bra Mount) $100
Replace Standard Rain cover with Window Rain Cover $10
Zippered 'Exterior Pass-Thru' $15
Additional Pen Loops $10
Powerlet Electrification Kit (PTB001) Installed $30
D-Rings $10
Custom Features as specified TBD
310 
Goldwing 1800 Tankbag
Standard Features: Water Resistant Exterior Zippers
1 Lid mounted interior flat pocket
with pen/flashlight loops and a D-ring for attaching keys
3 exterior 3D 'Basic' pockets (one on either side and one closest to the rider)
Handle made from nylon webbing

Map Pocket made with a water resistant zipper
Standard Rain Cover
Mounting Base with cutout for radio controls (no panniers)

No scratch neoprene padding on the surface that contacts the bike
Choice of high or low contrast logos (low contrast is the default)
Possible Options Additional Charge
Panniers See below
Full Circumference Expando Section $40
Half Circumference Expando Section $20
Gizmo Section for electronics with pass thru to main compartment $50
Upgrade Basic Pockets to Standard Pockets $10 each pocket
Upgrade Basic Pockets to Standard Plus Pockets $15 per pocket
 Add Hidden Pocket to Standard or Standard Plus Pockets $10 per pocket
Additional 'Basic' Pockets $15 per pocket
Additional 'Standard' Pockets $25 per pocket
Additional 'Standard Plus' Pockets $30 per pocket
Replace Standard Rain cover with Window Rain Cover $10
Zippered 'Pass-Thru' $15
Additional Pen Loops $10
Powerlet Electrification Kit (PTB001) Installed $30
D-Rings $10
Custom Features as needed TBD
310
Goldwing 1800 Panniers
Base with Panniers
Panniers have flat pockets on the outer side that include reflective material and close

with a Velcro® flap
No scratch neoprene padding on the surface that contacts the bike
Pen/Flashlight loops and a D-ring on exterior of Panniers
Choice of high or low contrast logos (low contrast is the default)
Possible Options Additional Charge
Zippered 'Pass-Thru' $10
Open pocket under main pocket with rain drain hole $20 per side
Powerlet Electrification Kit (PTB001) Installed $30
Custom Features as needed TBD
$120 when purchased without the tankbag
$85 when purchased with the tankbag
Harley-Davidson Tankbag to your specifications and fits Ultras or any bike with a raised center console
Standard Features: Bottom contoured to fit over the console
Water Resistant Exterior Zippers
2 Large or 3 small Lid mounted interior flat pockets
with pen/flashlight loops and a D-ring for attaching keys
2 exterior 3DBasic Pocketss (one on either side )
Handle made from nylon webbing

No scratch neoprene padding on the surface that contacts the bike
Standard Rain cover
Map pocket made with a water resistant zipper
Mounts with strap around the steering head and straps going under the seat

Choice of high or low contrast logos (low contrast is the default)
Possible Options Additional Charge
Upgrade Basic Pocket to Standard Pockets $10 per pocket
Upgrade Basic Pocket to Standard Plus Pockets $15 per pocket
Add Hidden Pocket to Standard or Standard Plus Pockets $10 per pocket
Additional 'Basic' Pockets $15 per pocket
Additional 'Standard' Pockets $25 per pocket
Additional 'Standard Plus' Pockets $30 per pocket
Magnetic Mount $50
Bra Mount $45
Replace Standard Rain cover with Window Rain Cover $10
Zippered 'Exterior Pass-Thru' $15
Additional Pen Loops $10
Powerlet Electrification Kit (PTB001) Installed $30
D-Rings $10
Custom Features as specified TBD
$350
Auxilliary Tankbag
Standard Features: Water Resistant Exterior Zippers
3 exterior 3D 'Basic' pockets (horizontally mounted pockets have a flat pocket

on the inner lid with pen/flashlight loops and a D-ring for attaching keys)
Vertically mounted pockets with outward facing side have reflective

material on the outer side
Choice of high or low contrast logos (low contrast is the default)
Possible Options Additional Charge
Additional 'Basic' Pockets $15 per pocket
Additional 'Standard' Pockets $25 per pocket
Additional 'Standard Plus' Pockets $30 per pocket
Upgrade Basic Pockets to Standard Pockets $10 per pocket
Upgrade Basic Pockets to Standard Plus Pockets $15 per pocket
Add Hidden Pocket to Standard or Standard Plus Pockets $10 per pocket
Water Bottle holder (user supplied bottle) $15
Insulated 1/2 Gallon Water Bottle with drinking tube and bite valve
(includes the mount on an Aux tank)
$40
Insulated 1 Gallon Water Bottle with drinking tube and bite valve
(includes the mount on an Aux tank)
$45
Oversized pocket surcharge (any individual pocket with length + width > 20 inches) $10
Custom Features as needed TBD
$150
Rally Book
Standard Features: Water Resistant Exterior Zipper
Clear, water resistant front so rally instructions can be read from the outside

Interior flat pockets for papers
Pen
loops 
Handle made from nylon webbing
9 1/4 x 14 1/4 x 2 1/4 sized to fit a storage clipboard or 3-ring binder
Velcro® on the bottom to fit to a tankbag or bra and a swivelhook for a secure connection to a D-Ring

Choice of high or low contrast logos (low contrast is the default)
Possible Options Additional Charge
Aluminum Storage Clipboard $30
Rally page holders
(Zip-loc® type clear plastic bags that close with a slider) 9 1/2 x 12 1/2 inches
$1 each
Custom Features as needed TBD
$110
Rally Book Lite
Standard Features: Water Resistant Exterior Zipper
Clear, water resistant front so rally instructions can be read from the outside

Interior flat pockets for papers
Handle made from nylon webbing
10 1/4 x 13 1/4 x 3/4 inches with rounded corners
Velcro® on the bottom to fit to a tankbag or bra and a swivelhook for a secure connection to a D-Ring

Choice of high or low contrast logos (low contrast is the default)
$80
Hydration Systems
For passenger peg mount - one half gallon Jug plus 6' drink tubing, bite valve, fabric Jug Holder with reflective strip plus webbing to hold it in place
$50
For passenger peg mount - one gallon Jug plus 6' drink tubing, bite valve, fabric Jug Holder with reflective strip plus webbing to hold it in place   $55
One half gallon Jug plus 6' drink tubing and bite valve only  $30
One gallon Jug plus 6' drink tubing and bite valve only   $35
Jug holder with reflective strip plus webbing to attach to pegs   $20
Quick Release Valves for the Hydration System
Choice of high or low contrast logos (low contrast is the default)
 $13
Additional Items  
Custom Sized map pocket i.e. replacement for Mini Cortech bags $25
Replace zippers in Multivario bags
Note: Please send me only the bag or base to be repaired and make sure it is empty. If you can't empty the bag out because of permanentaly installed items, please let me know what those items are in advance. An additional charge may apply.
$25 each zipper
Replace elastic in Multivario bag base
Note: Please send me only the bag or base to be repaired and make sure it is empty. If you can't empty the bag out because of permanentaly installed items, please let me know what those items are in advance. An additional charge may apply.
$20
Replace elastic in Multivario bag sidewall mount
Note: Please send me only the bag or base to be repaired and make sure it is empty. If you can't empty the bag out because of permanentaly installed items, please let me know what those items are in advance. An additional charge may apply.
$25
Replace elastic in Multivario bag bottom mountNote: Please send me only the bag or base to be repaired and make sure it is empty. If you can't empty the bag out because of permanentaly installed items, please let me know what those items are in advance. An additional charge may apply. $35
Replace main zipper OR map pocket in Multivario bags for the R1200 GS or RT$85
Replace main zipper AND map pocket in Multivario bags for the R1200 GS or RT$105
I am a Powerlet dealer and sell their wiring products at a 10% discount when purchased with a tankbag or aux bag. TBD
Rally page holders
(Zip-loc® type clear plastic bags that close with a slider - slider on the long side) 9 1/2 x 12 1/2 inches
$1 each
Special order items are priced as needed TBD

...

Other features will increase the price. Please email me with your requirements and I'll work up an estimate. Because I'm selling customized bags via the net, several iterations of a bag may be necessary before you consider it acceptable. All my products are guaranteed for one year against defects in materials and workmanship. Repairs or modifications after acceptance are available for a fee.